Sandvik Coromant M5F90 Cuts Thin Aluminum Parts
The M5F90 face-milling cutter by Sandvik Coromant is designed for machining thin-walled aluminum automotive parts without burring, scratching or chipping.
Sandvik Coromant’s M5F90 cutter body diameter (25-80 mm or 0.98"-3.15") carries brazed PCD inserts that need no adjustment and enable high feed rates without vibration. In addition, no scratches, burrs or breakages are produced on the machined part because of a combination of cutting angles, insert shape, edge preparation and cutting parameters.
Roughing and finishing operations are facilitated by a single tool. In terms of roughing, the tool works as a conventional cutter, with all rough-cutting edges positioned on the same diameter and height. The cutter is able to machine as deep as 4 mm (0.157"). With regards to finishing, this portion of the tool consists of radial and axial stepped cutting edges. According to the company, this configuration ensures burr-free milling and surface finish on thin-walled aluminum parts while enabling a close pitch to avoid cutting vibration.
Although dedicated to thin-wall milling operations on aluminum parts, such as gearbox casings and housings, the cutter is also able to machine large engagement material for applications across the automotive segment.
Related Content
-
The Ins and Outs of Inserts
Understanding how inserts are made provides valuable insight into how their performance can be optimized.
-
Replaceable-Insert Spade Drill Basics, Advantages
Although solid carbide and indexable-insert drills have their place in a machine shop, replaceable-insert spade drills offer specific advantages for various holemaking operations on machining centers and lathes.
-
Shop Sets its Sights on Precise Tool Alignment
A Wisconsin shop has found that visual tool alignment technology has improved tool life and surface finishes for its Swiss-type lathes while increasing throughput as well.
_Network-Zone_TAP-300x250-Final.jpg;maxWidth=300;quality=90;format=webp)
